China Good quality Efg105 Agricultural Flail Mower 3 Point Hitch Tractor with Great quality

Product Description

 

Product Description

The EFG Series Flail Mower belongs to Medium Duty. Ideal for an orchard, nursery, vineyard, in the greenhouse or for gardening. With good blades and interchangeable blades, it is ideal for your ground maintenance. By putting on the Grass Mulching Blades you can maintain the grass area around your home, plus cut and mulch small twigs. If you need to maintain more dense areas, install the Hammer Blades and you will be CZPT to cut and mulch wooded material up to 2 inches in diameter.
 

Packaging & Shipping

Our Advantages

We have a whole complete set of production equipment, so we can shorten the lead time and prices of machine.

We guarantee 1 year warranty of all our products.

We can produce machines according to any requirements from our customers.

We develop new machines every year.

We  provide gifts for all of our customers before every year’s Christmas.

Contact info

Contacter:Laura
 
 
 

 

MODEL EFG105 EFG115 EFG125 EFG135
Structure Weight 230kg 245kg 257kg 272kg
Working Width 1.02m 1.12m 1.22m 1.32m
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade/Hammer
Number of Flail Y Blade:36 / Hammer:18 Y Blade:36 / Hammer:18 Y Blade:36 / Hammer:18 Y Blade :44/ Hammer:22
Tractor HP 15-20hp 15-20hp 15-20hp 18-25hp

###

MODEL EFG145 EFG155 EFG165 EFG175
Structure Weight 287kg 302kg 317kg 329kg
Working Width 1.42m 1.52m 1.62m 1.72m
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade/Hammer
Number of Flail Y Blade :44/ Hammer:22 Y Blade:4/ Hammer:22 Y Blade:52/ Hammer:26 Y Blade :52/ Hammer:26
Tractor HP 20-30hp 20-30hp 25-35hp 30-35hp
MODEL EFG105 EFG115 EFG125 EFG135
Structure Weight 230kg 245kg 257kg 272kg
Working Width 1.02m 1.12m 1.22m 1.32m
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade/Hammer
Number of Flail Y Blade:36 / Hammer:18 Y Blade:36 / Hammer:18 Y Blade:36 / Hammer:18 Y Blade :44/ Hammer:22
Tractor HP 15-20hp 15-20hp 15-20hp 18-25hp

###

MODEL EFG145 EFG155 EFG165 EFG175
Structure Weight 287kg 302kg 317kg 329kg
Working Width 1.42m 1.52m 1.62m 1.72m
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade/Hammer
Number of Flail Y Blade :44/ Hammer:22 Y Blade:4/ Hammer:22 Y Blade:52/ Hammer:26 Y Blade :52/ Hammer:26
Tractor HP 20-30hp 20-30hp 25-35hp 30-35hp

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

shaft pto

As one of leading shaftpto manufacturers, suppliers and exporters of mechanical products, We offer shaftpto and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts