China Most Popular Rice Paddy Field Tractor Dq704b 70HP 4WD Wheel Paddy Tire Agricultural Farm Tractor cutting pto shaft

Solution Description

Most well-known Rice paddy field tractor DQ704B 70HP Four wheel drive Wheel paddy tire Agricultural farm tractor

Tractor Major Functions and Benefits:
1.Geared up famous manufacturer motor exhibiting superior capability,lower gasoline intake,large economic efficiency.
two. Streamlined visual appeal layout, gorgeous and generous.
3.Transmission Circumstance adopt meshed shift and add the gearbox interlock unit helps make the operation far more effortlessly,reputable and easier.
4. Double motion clutch with disc spring, carry out steadily and simple to work.
5. Totally hydraulic steering method drastically diminished driver’s work strength.
6. Wet disc brake system, reputable brake functionality.
7. Individual injection of hydraulic oil, dependable to function.
8. The lifter with force and place adjustment, with reliable raise.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high functioning performance.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural products of all in excess of the planet.
ten. Big Chassis and Heavy-obligation Rear axle for Resilient Robust equipment.
11. Entire series gentle, ROPS,Sunshade/Cover, Admirer/Heater/Air-conditioned cabin are all available, for more cozy driving setting. 

Tractor Major specificaiton and Technical parameters:

Model  DQ704B
Drive type  4×4
Engine
Engine model YTO, 4-Cylinder diesel motor
Capacity of fuel tank (L) seventy eight
Engine power at rated speed (kw/hp) fifty one.5kw/70HP
PTO power at rated speed (kw) 43.eight
Transmission
Steering variety Total Hydraulic Steering
Clutch Dry,Twin-stage type
PTO Speed (rpm) 540/760
Gearshift  8F+2R /16F+4R
Hydraulic system
Hydraulic output flux (L/min) thirty
Hydraulic output valve  two-Team (optional)
Three point linkage
Category of 3-point link  Category II
Lifting force (at point of 610mm)KN 12.five
Technical parameter
Dimension (L x W x H)mm 4571x1929x2568
Wheel base(mm) 2236
Track base(mm) front wheel 1450
Track base(mm) rear wheel 1530
The smallest clearance(mm) 340
Front tyre  8.3-24
Rear tyre  14.9-thirty
Optional Configurations
Common cabin with Fan Heater cabin AC cabinROPS Canopy (Sunshade) 16F+4R creeper gearshift, Good sort Hydraulic lifter, 2-Team Hydraulic output valve Front ballast Rear ballast Air brake, Swing draw bar
Loading quantity
3 units/40HC container in Bare packing  6 units/40HC container in Bulk packing by Iron crate 

Advance Manufacutring Line:

Strictly Inspecting and Full Screening for ensuring large quality product:

Tractor Packing and Loading container for Offering products :

High quality DQ704B 70HP 4 wheel drive tractor have distinct Optional configurations for pick:


 

Ideal price will be quoted for you as shortly as obtain your Necessity !

Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor
Certification: ISO, CE, CCC
Drive Wheel: 4WD
Emission Standard: Euro III
Fuel: Gas / Diesel

###

Customization:

###

Model  DQ704B
Drive type  4×4
Engine
Engine model YTO, 4-Cylinder diesel engine
Capacity of fuel tank (L) 78
Engine power at rated speed (kw/hp) 51.5kw/70HP
PTO power at rated speed (kw) 43.8
Transmission
Steering type Full Hydraulic Steering
Clutch Dry,Dual-stage type
PTO Speed (rpm) 540/760
Gearshift  8F+2R /16F+4R
Hydraulic system
Hydraulic output flux (L/min) 30
Hydraulic output valve  2-Group (optional)
Three point linkage
Category of 3-point link  Category II
Lifting force (at point of 610mm)KN 12.5
Technical parameter
Dimension (L x W x H)mm 4010x1929x2568
Wheel base(mm) 2236
Track base(mm) front wheel 1450
Track base(mm) rear wheel 1530
The smallest clearance(mm) 340
Front tyre  8.3-24
Rear tyre  14.9-30
Optional Configurations
Common cabin with Fan; Heater cabin; AC cabin;ROPS; Canopy (Sunshade); 16F+4R creeper gearshift, Positive type Hydraulic lifter, 2-Group Hydraulic output valve; Front ballast; Rear ballast; Air brake, Swing draw bar
Loading quantity
3 units/40HC container in Bare packing ; 6 units/40HC container in Bulk packing by Iron crate 
Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor
Certification: ISO, CE, CCC
Drive Wheel: 4WD
Emission Standard: Euro III
Fuel: Gas / Diesel

###

Customization:

###

Model  DQ704B
Drive type  4×4
Engine
Engine model YTO, 4-Cylinder diesel engine
Capacity of fuel tank (L) 78
Engine power at rated speed (kw/hp) 51.5kw/70HP
PTO power at rated speed (kw) 43.8
Transmission
Steering type Full Hydraulic Steering
Clutch Dry,Dual-stage type
PTO Speed (rpm) 540/760
Gearshift  8F+2R /16F+4R
Hydraulic system
Hydraulic output flux (L/min) 30
Hydraulic output valve  2-Group (optional)
Three point linkage
Category of 3-point link  Category II
Lifting force (at point of 610mm)KN 12.5
Technical parameter
Dimension (L x W x H)mm 4010x1929x2568
Wheel base(mm) 2236
Track base(mm) front wheel 1450
Track base(mm) rear wheel 1530
The smallest clearance(mm) 340
Front tyre  8.3-24
Rear tyre  14.9-30
Optional Configurations
Common cabin with Fan; Heater cabin; AC cabin;ROPS; Canopy (Sunshade); 16F+4R creeper gearshift, Positive type Hydraulic lifter, 2-Group Hydraulic output valve; Front ballast; Rear ballast; Air brake, Swing draw bar
Loading quantity
3 units/40HC container in Bare packing ; 6 units/40HC container in Bulk packing by Iron crate 

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Most Popular Rice Paddy Field Tractor Dq704b 70HP 4WD Wheel Paddy Tire Agricultural Farm Tractor     cutting pto shaftChina Most Popular Rice Paddy Field Tractor Dq704b 70HP 4WD Wheel Paddy Tire Agricultural Farm Tractor     cutting pto shaft
editor by czh 2023-01-08

shaft pto

As one of leading shaftpto manufacturers, suppliers and exporters of mechanical products, We offer shaftpto and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts