China Pto Drive Peanut Harvester Harvest 3-6 Mu/H Supporting Power 15-30 HP Four-Wheel Tractor pto shaft bearing

Merchandise Description

PTO Push Peanut Harvester Harvest 3-6 mu/h Supporting Energy fifteen-thirty HP 4-wheel Tractor
Gentle excess weight,small measurement,effortless installation and dis-assembly
Can comprehensive peanut digging,soil getting rid of,neatly put at 1 time.
Large working effectiveness, significantly less procedure decline, fast transfer pace, safe and reputable use.
Powerful versatility, multi-goal, suitable for ridge planting of garlic and peanuts, not influenced by ridge width and ridge length, suited for various planting modes in the place, large plots of plains and small plots of hilly mountains can be employed.

Design 4HT-800
Operating width 800mm
Digging rows two
Digging depth 200mm
Rotation speed of input shaft 540-720 r/min
Functioning efficiency 3-6 mu / hour
Matched energy 15-50 horsepower
Relevant row spacing two hundred-300mm
Applicable ridge spacing 650-1000mm
Applicable row spacing in flat land 450 mm wide rows
250mm narrow rows
Size(L*W*G) 2300*1571*1000mm
Bodyweight 240kg
Matching sort Heart output and Facet output
(It could use with no Rear output shaft )
The max width of the rear wheel track of the tractor ≤ 1.3 m

 

Net:lianshengmachinery
 HangZhou Liansheng Machinery Co.,Ltd.
 HangZhou Town,ZheJiang  Province, China

Type: Horizontal Cut Harvester
Application: Peanut
Power Source: Tractor
Harvest method: Uprooted
Drive Type: Gear Drive
Transmission: Soft Shaft

###

Customization:

###

Model 4HT-800
Working width 800mm
Digging rows 2
Digging depth 200mm
Rotation speed of input shaft 540-720 r/min
Working efficiency 3-6 mu / hour
Matched power 15-50 horsepower
Applicable row spacing 200-300mm
Applicable ridge spacing 650-1000mm
Applicable row spacing in flat land 450 mm wide rows
250mm narrow rows
Size(L*W*G) 2300*1020*1000mm
Weight 240kg
Matching form Center output and Side output
(It could use without Rear output shaft )
The max width of the rear wheel track of the tractor ≤ 1.3 m
Type: Horizontal Cut Harvester
Application: Peanut
Power Source: Tractor
Harvest method: Uprooted
Drive Type: Gear Drive
Transmission: Soft Shaft

###

Customization:

###

Model 4HT-800
Working width 800mm
Digging rows 2
Digging depth 200mm
Rotation speed of input shaft 540-720 r/min
Working efficiency 3-6 mu / hour
Matched power 15-50 horsepower
Applicable row spacing 200-300mm
Applicable ridge spacing 650-1000mm
Applicable row spacing in flat land 450 mm wide rows
250mm narrow rows
Size(L*W*G) 2300*1020*1000mm
Weight 240kg
Matching form Center output and Side output
(It could use without Rear output shaft )
The max width of the rear wheel track of the tractor ≤ 1.3 m

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft CollarA 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China Pto Drive Peanut Harvester Harvest 3-6 Mu/H Supporting Power 15-30 HP Four-Wheel Tractor     pto shaft bearingChina Pto Drive Peanut Harvester Harvest 3-6 Mu/H Supporting Power 15-30 HP Four-Wheel Tractor     pto shaft bearing
editor by czh 2022-12-30

shaft pto

As one of leading shaftpto manufacturers, suppliers and exporters of mechanical products, We offer shaftpto and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts