China Sinotruk HOWO 16000liters 20000liters Sludge Cleaning Sewage Suction Tank Truck with Ltaly Brand Vacuum Pump pto shaft engagement

Solution Description

Sinotruk CZPT 16000liters 20000liters Sludge Cleansing Sewage Suction Tank Truck With Ltaly Model Vacuum Pump

Product Description
1. Chassis:
1) Drive type: 4×2, 4×4, 6×4, 8×4 etc.
two) Our factory has great organization romantic relationship with XIHU (WEST LAKE) DIS.FENG, FOTON, ISUZU, FAW, SINOTRUCK, SHACMAN, JAC, JMC, etc.
two. Tanker physique:From 2m3 to 25 m3 capacity.
3. Accent of sewage suction factions: Equipped with PTO, transmission shaft, vacuum suction sewage pump, higher stress molding tank, humidity separator, fuel-oil separation, numerous directional handle valve, hanger rod, self-discharging valve, suck fecal gun and pipe community program.

 

 

Description:
1. Chassis:
one) Drive variety: 4×2, 4×4, 6×4, 8×4 and so forth.
two) Our manufacturing unit has very good business romantic relationship with XIHU (WEST LAKE) DIS.FENG, FOTON, ISUZU, FAW, SINOTRUCK, SHACMAN, JAC, JMC, and many others.
2. Tanker physique:From 2m3 to 25 m3 potential.
three. Accent of sewage suction factions: Outfitted with PTO, transmission shaft, vacuum suction sewage pump, higher strain molding tank, dampness separator, gasoline-oil separation, several directional handle valve, hanger rod, self-discharging valve, suck fecal gun and pipe network program.
 

Full Vehicle Parameter
Vehicle  HOWO vacuum sewage truck
General dimension (mm) 9000×2500×3300
Sewage tank (m3) sixteen
Gross car excess weight (kg) Appro×25000
Control bodyweight (kg) Appro×10000
Payload (kg) Appro×15000
Wheel base (mm) 4325+1350
Max velocity (km/h) 90
Chassis Parameter
Cabin Flat best cabin,a sleeper,power steering, air conditioner, 3 passengers,remaining hand drive,with Air Conditioner
Push sort 6×4
Engine Manufacturer: SINOTRUCK
Product: WD615.sixty nine,336HP
Sort: diesel, turbocharged, 6 cylinder.
Displacement: 9726ml
Emission common: Euro two
Transmission 10 ahead,2 reverse, handbook operated 
Tire product 12R22.five
No.of tires 10 pcs, with 1pc spare tire
Superstructure Parameter
Characteristic 1. Sewage tank quantity 16000 liter.
two. Sewage tank materials is carbon metal,thickness 5mm.
3. Sewage suction pipe 1pcs, duration 7m.
four. Hydraulic lifting sewage tank,rear cover can open up.
5. Outfitted with PTO.
6. Equipped with vacuum pump.
7. Outfitted with oil drinking water separator, overflow valve,seeking sewage window, self stream exit,hand washing unit.
Overall performance (1) Vertical suction ≥ 7m.
(2) Pumping pace : 45L/s.
(3) Consumption and exhaust diameter: 50mm.
(4) Complete tank pumping time ≤ 5min.
(5) Sewage tank emptying time ≤ 4min.

Goods Catalog:

1. LPG Tank Truck Trailer/ Fuel Tanker Truck/ LPG station
2. Water truck / H2o Tank Truck / Water Sprinkler Truck/Water Tanker
3. Truck with crane / Truck mounted crane
4. Dump Truck / Tipper Truck/Aspect Tipper/Conclude Tipper
five. Fire Fighting Truck / Fireplace Truck / Fire Vehicle
six. Concrete Mixer Truck
7. Van truck /Refrigerated truck
eight. Fecal suction truck / Sewage suction truck, 
9. Cement Powder Tank truck/ Bulk cement truck
ten. High-altitude operation truck, 
eleven. Self-loading rubbish truck, garbage compactor truck, sealed rubbish truc
12. Tractor
13. High Strain Cleaning Truck
14. Sweeper Truck
fifteen. Semi Trailer ( flat mattress trailer / skeleton trailer / dump semi trailer / side wall trailer / low mattress trailer / van container trailer / warehouse trailer, and many others. )

US $12,640-27,600
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Certification: ISO9000, CCC, TS16949, EEC, CE
Emission Standard: Euro 2
Payload: 15ton-16ton
Transmission Type: Manual

###

Customization:

###

Complete Vehicle Parameter
Vehicle  HOWO vacuum sewage truck
Overall dimension (mm) 9000×2500×3300
Sewage tank (m3) 16
Gross vehicle weight (kg) Appro×25000
Curb weight (kg) Appro×10000
Payload (kg) Appro×15000
Wheel base (mm) 4325+1350
Max speed (km/h) 90
Chassis Parameter
Cabin Flat top cabin,a sleeper,power steering, air conditioner, 3 passengers,left hand drive,with Air Conditioner
Drive form 6×4
Engine Brand: SINOTRUCK
Model: WD615.69,336HP
Type: diesel, turbocharged, 6 cylinder.
Displacement: 9726ml
Emission standard: Euro 2
Transmission 10 forward,2 reverse, manual operated 
Tire model 12R22.5
No.of tires 10 pcs, with 1pc spare tire
Superstructure Parameter
Characteristic 1. Sewage tank volume 16000 liter.
2. Sewage tank material is carbon steel,thickness 5mm.
3. Sewage suction pipe 1pcs, length 7m.
4. Hydraulic lifting sewage tank,rear cover can open.
5. Equipped with PTO.
6. Equipped with vacuum pump.
7. Equipped with oil water separator, overflow valve,looking sewage window, self flow exit,hand washing device.
Performance (1) Vertical suction ≥ 7m.
(2) Pumping speed : 45L/s.
(3) Intake and exhaust diameter: 50mm.
(4) Full tank pumping time ≤ 5min.
(5) Sewage tank emptying time ≤ 4min.
US $12,640-27,600
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Certification: ISO9000, CCC, TS16949, EEC, CE
Emission Standard: Euro 2
Payload: 15ton-16ton
Transmission Type: Manual

###

Customization:

###

Complete Vehicle Parameter
Vehicle  HOWO vacuum sewage truck
Overall dimension (mm) 9000×2500×3300
Sewage tank (m3) 16
Gross vehicle weight (kg) Appro×25000
Curb weight (kg) Appro×10000
Payload (kg) Appro×15000
Wheel base (mm) 4325+1350
Max speed (km/h) 90
Chassis Parameter
Cabin Flat top cabin,a sleeper,power steering, air conditioner, 3 passengers,left hand drive,with Air Conditioner
Drive form 6×4
Engine Brand: SINOTRUCK
Model: WD615.69,336HP
Type: diesel, turbocharged, 6 cylinder.
Displacement: 9726ml
Emission standard: Euro 2
Transmission 10 forward,2 reverse, manual operated 
Tire model 12R22.5
No.of tires 10 pcs, with 1pc spare tire
Superstructure Parameter
Characteristic 1. Sewage tank volume 16000 liter.
2. Sewage tank material is carbon steel,thickness 5mm.
3. Sewage suction pipe 1pcs, length 7m.
4. Hydraulic lifting sewage tank,rear cover can open.
5. Equipped with PTO.
6. Equipped with vacuum pump.
7. Equipped with oil water separator, overflow valve,looking sewage window, self flow exit,hand washing device.
Performance (1) Vertical suction ≥ 7m.
(2) Pumping speed : 45L/s.
(3) Intake and exhaust diameter: 50mm.
(4) Full tank pumping time ≤ 5min.
(5) Sewage tank emptying time ≤ 4min.

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Sinotruk HOWO 16000liters 20000liters Sludge Cleaning Sewage Suction Tank Truck with Ltaly Brand Vacuum Pump     pto shaft engagementChina Sinotruk HOWO 16000liters 20000liters Sludge Cleaning Sewage Suction Tank Truck with Ltaly Brand Vacuum Pump     pto shaft engagement
editor by czh 2023-01-04

shaft pto

As one of leading shaftpto manufacturers, suppliers and exporters of mechanical products, We offer shaftpto and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.

Recent Posts